SKIOLD Spark Detection – detect sparks before they develop into a fire

09 November 2026 | SKIOLD

• Crop management

downloadFor editorial use only

A single glowing particle in a milling plant can have serious consequences if it is not detected in time. With SKIOLD Spark Detection, you get an active safety solution that detects potential sources of ignition at an early stage and reacts automatically to reduce the risk of fire.

The system uses infrared (IR) spark detectors, which detect heat radiation from glowing particles in the conveying equipment downstream of the mill. This means that potential ignition sources can be detected before they develop into open flames or visible smoke.

When a spark is detected, the system’s safety functions are automatically activated. The plant can be shut down, and relevant dampers and shut-off valves are closed, thereby interrupting the conveying routes and preventing the spark from being carried further into the mill plant. As an option, the solution can be supplemented with automatic fire-extinguishing equipment.

Early detection and automatic response

Spark detection helps to improve safety in milling plants, where dust, conveying processes and mechanical components place particular demands on fire safety.

By detecting potential ignition sources at an early stage and responding automatically, SKIOLD Spark Detection helps to reduce the risk of fire, damage to the plant and costly operational losses.

The solution expands SKIOLD’s milling range with active spark monitoring and the option to integrate fire protection as part of the overall milling solution.

Translated with DeepL.com (free version)