Brush removes coatings in the feed tubes
27/10/2022
Daltec presents a brush unit for feed chain conveyor systems as a two star New Product at Agromek
The brush can be clicked onto the feed chain without tool requirements.
A small brush that can be clicked onto the feed chain conveyor ensures that coatings are prevented in the feed tubes.
The brush can be clicked onto a Daltec feed chain system with a diameter of 60 mm without tool requirements. This click-on has been classified as a two star New Product at Agromek 2022 and is presented by Daltec A/S.
This brush consists of two parts which are clicked onto the feed chain. Daltec recommends that this brush is applied periodically and with a higher frequency during winter months when there is a greater risk of condensation in the feed chain system.
This brush can thus reduce coatings in the feed tubes and maintains improved feed hygiene.
Click here for direct access to product photograph.
For further information:
Daltec A/S
Telephone: +45 76 64 04 40
Stand No. L9270